Besen 3.7/11 kW - fase 3 - 16A - type 2 - 6 meter - EV Charger

• This model also consists of an information screen which shows you: real-time current, real-time voltage, power consumed, temperature, charging icon, charging time and rated current.
  
  
• Protection against overcurrent, overvoltage, short circuit, and DC leakage.

Besen 11 kW wallbox installation

When installing a Besen 11 KW EV charger, you actually have 2 choices;
1) You can install the Besen 11 kW wallbox yourself
2) Let a charging station installer install it

In general, we always recommend having the charging station installed by a recognised charging station installer. After all, you don't want to compromise on safety and knowledge. People often underestimate how much is involved and mistakes can have major consequences. A recognised installer has completed the necessary installation courses, often including those provided by the brand itself.
If you decide to install the charging station at home yourself, we would like to give you a few tips.
First, always use an earth leakage circuit breaker with B characteristics, which is always lower than your main connection. Secondly, for this 11 kW charging station, use a 5x2.5mm2 YMVK cable for inside / in conduit or a 4x2.5mm2 YMVK-as ground cable for outside. Besides the right power cable, you also have check whether you still have enough space in your fuse box. Because the earth leakage circuit breaker takes up 4 modules and a possible 3 phase kwh meter also takes up 4 modules, so an expansion box is often needed.
For specific charging station installation instructions, please refer to the manual(s) below.

Want to know more about this Besen wallbox?
- Installation & user manual
- 3-phase wallbox wiring
- Datasheet