Loady charging cable type 2 with open end - 3.7 kW - 1 phase 16A - outlet
- Best priced charging cable with open end
- Made ready-to-use to easily swap the old charging cable
This is a used model which has been used and may therefore be dirty and/or have slight signs of use. The EV charging cable has been tested and cleaned where possible
NOTE: Warranty is retained
This charging cable is 15 metres long and has a charging capacity of up to 3.7 kW, suitable for a single-phase connection of 16A. The cable has a type 2 plug for connection to the car and is ideal as a replacement for a wallbox's existing charging cable. This can be useful when the current cable is not the right length, defective or when a type 1 plug needs to be replaced with a type 2. The open end of the cable is already equipped with connection contacts for direct installation in the wallbox. The cable is suitable for any wallbox where the charging cable is replaceable.
Item number: OUT203 + OUT248 + OUT251
Dit is een outlet sale kabel, met een aanzienlijke korting. Op de site stond dit duidelijk vermeld, evenals dat de kabel getest en gereinigd was. Bij aflevering was de kabel netjes verpakt en je kon ruiken dat deze zeer goed schoon gemaakt was. Ook de verdere informatie over type kabel en ader codering was duidelijk. Zeer positief verrast dat er nog zoveel aandacht is besteed aan een retour/outlet product.
Posted on 01/07/2026- Brand: LDY
- EAN: OUT203 + OUT248 + OUT251
- Article number: OUT203 + OUT248 + OUT251
- Plug type charging point side: Open
- Plug type vehicle side: Type 2 (Mennekes) Female
- Number of Phases: 1 Phase
- Number of Amps per phase: 16A
- Maximum payload: 3.7 kW
- Charging cable length: 15 meter
- Colour(s): Black
- Usage: For charging stations with fixed charging cable
- Protection degree: IP55
- Warranty period: 24 months
