Mercedes-Benz EQC 400 4MATIC EV charger: which one is the best fit?
The Mercedes-Benz EQC 400 4MATIC can charge at home at a maximum of 11 kW AC using a three-phase connection. This 11 kW charging limit determines which EV charger is worthwhile: a more powerful 22 kW charger will not charge the EQC any faster because the vehicle cannot accept more power than its onboard charger supports. An 11 kW EV charger is therefore the logical choice. Would you first like to explore the wider range? View all Mercedes-Benz EV chargers in our overview.
For the Mercedes-Benz EQC 400 4MATIC, we recommend choosing a charger from our range of 11 kW EV chargers.
Charging specifications of the Mercedes-Benz EQC 400 4MATIC
| Specification | Value |
|---|---|
| Usable battery capacity | 80 kWh |
| Maximum AC charging power at home | 11 kW (three-phase) |
| Range (WLTP) | 417 km |
| Charging time with an 11 kW EV charger | approx. 8.5 hours |
| Charging connector | Type 2 |
| DC fast charging | 112 kW |
Which EV charger is suitable for the Mercedes-Benz EQC 400 4MATIC?
With its 11 kW onboard charger, the Mercedes-Benz EQC 400 4MATIC can make full use of an 11 kW EV charger on a three-phase connection. If your home only has a single-phase connection, the charging power is limited to a maximum of 7.4 kW and a complete charging session takes longer. When you need an accurate and verifiable record of the electricity used for charging, for example for reimbursement by an employer, leasing company or your own business, choose an EV charger with an integrated MID meter. In the Netherlands, a compatible charger with a MID meter may also be used for ERE registration. ERE certificates are only applicable in the Netherlands.
| Situation | Recommended EV charger | MID meter | Why? |
|---|---|---|---|
| Standard home charging | Easee Charge Up 22 kW | No | A compact and intelligent EV charger that charges the Mercedes-Benz EQC at its maximum 11 kW capacity using a three-phase 16A connection. The charging power can be adjusted to match the available electrical connection. Dynamic Load Balancing is available when combined with the Easee Equalizer. |
| Business use or ERE registration in the Netherlands | Zaptec Go 2 22 kW | Yes | The integrated MID meter provides an accurate and verifiable record of every charged kWh. This makes the charger suitable for business reimbursement and ERE registration in the Netherlands. ERE certificates are only applicable in the Netherlands. With a maximum capacity of 22 kW, it is also prepared for a future EV with a higher AC charging capacity. |
| Budget option without a MID meter | Besen 11 kW | No | An affordable option for charging at 11 kW. Because it does not have an integrated MID meter, it is less suitable when certified energy measurement, business reimbursement or Dutch ERE registration is required. |
View all 11 kW EV chargers in our range or specifically compare our three-phase EV chargers with a MID meter. We always recommend having the electrical connection installed by a qualified installer. This is safer and can be important for your insurance coverage.
How long does it take to charge the Mercedes-Benz EQC 400 4MATIC?
The calculation is straightforward: an 80 kWh battery divided by 11 kW of charging power results in a charging time of approximately 8.5 hours from empty to full, including normal charging losses. If you connect the car at around 23:00, it will be fully charged again the following morning without requiring any special planning. With a single-phase connection, the EQC charges at a maximum of 7.4 kW and a full charging session takes approximately 12 hours and 45 minutes. During a journey, the EQC can use DC fast charging at up to 112 kW, allowing the battery to charge from 10 to 80 percent in around 40 minutes.
The EQC uses a Type 2 connection, just like most modern EV chargers. At home, you can charge using the fixed cable or Type 2 socket on the charger. If you also want to charge the car at public charging stations without a fixed cable, it is useful to keep a separate Type 2 charging cable in the car.
Other Mercedes-Benz models at Wallbox Discounter
The EQC 400 4MATIC is the only version within the EQC range. Do you drive another electric model from the brand? View our complete overview of charging advice for every Mercedes-Benz EV charger, with a separate page for each model and version.
Frequently asked questions
Does the Mercedes-Benz EQC 400 4MATIC require a three-phase connection to charge fully?
A three-phase connection is required to achieve the maximum charging power of 11 kW. With a single-phase connection, the EQC charges at a maximum of 7.4 kW, regardless of the maximum capacity of the EV charger. If your home does not yet have a three-phase connection, you can request an upgrade from your grid operator.
Why can a MID meter be important for the EQC?
A MID-certified kWh meter accurately and verifiably records the electricity used during charging. This is particularly important when charging costs are reimbursed by an employer, leasing company or your own business. In the Netherlands, a compatible charger with a MID meter may also be used for ERE registration. ERE certificates are only applicable in the Netherlands. Because the EQC has a large battery, a considerable number of kilowatt-hours can be recorded during each charging session.