Wallboxes & mobile ev car chargers for the Maxus eDELIVER 3
The Maxus eDELIVER 3 is a fully electric van that charges at home or at a business location via a Type 2 connection, with a maximum AC charging power of 7.4 kW on 1 phase. Because the van only charges on a single phase, this charging power directly determines which EV charger makes sense: a more powerful 3-phase charger will not charge this vehicle any faster. If you use the eDELIVER 3 for business purposes, it is also important to consider whether you need a MID-certified meter for accurate charging reimbursement. View our overview of all Maxus EV chargers.
For the Maxus eDELIVER 3, we recommend an EV charger from our range of 7.4 kW EV chargers.
Charging specifications of the Maxus eDELIVER 3
| Specification | Value |
|---|---|
| Usable battery capacity | 53 kWh |
| Max. AC charging power at home | 7.4 kW (1 phase, 32 A) |
| Charging connector | Type 2 (Mennekes) |
| Charging time with a 7.4 kW EV charger | just over 7 hours for a full charge |
| DC fast charging | up to 80% in approximately 45 minutes |
Which EV charger is suitable for the Maxus eDELIVER 3?
The eDELIVER 3 charges at home at a maximum of 7.4 kW on 1 phase. A 7.4 kW EV charger therefore provides exactly the amount of power the van can accept. A higher charging capacity will not shorten the charging time, because the vehicle itself determines the maximum. If you have a 3-phase connection at home or at your business premises, you can also install an 11 or 22 kW EV charger. The van will still charge on one phase at a maximum of 7.4 kW. You should also consider whether you need certified consumption measurement. A MID-certified energy meter records charging consumption accurately and transparently, which is particularly useful for a company or lease vehicle and for charging reimbursement by an employer. In the Netherlands, a MID meter may also be required for participation in the ERE scheme. The ERE scheme is only available in the Netherlands.
| Situation | Recommended EV charger | MID meter | Why? |
|---|---|---|---|
| Smart and future-proof charging | Easee Charge Up 22 kW | No | Compact and smart EV charger with a Type 2 socket. It can charge the eDELIVER 3 on 1 phase and provides additional capacity for a future electric vehicle. |
| Affordable basic solution | Besen 7.4 kW | No | Affordable single-phase EV charger with a fixed Type 2 cable and a charging capacity that matches the eDELIVER 3. Without a MID meter, however, it is less suitable for certified business reimbursement. |
View all 7.4 kW EV chargers in our range, or have your EV charger installed directly by a certified installer.
How long does it take to charge the Maxus eDELIVER 3?
You can estimate the charging time by dividing the battery capacity by the charging power. With the usable 53 kWh battery and a 7.4 kW EV charger, a full charge takes just over seven hours. This comfortably fits into an overnight charging session. If you need to recharge quickly while travelling, the eDELIVER 3 can charge to 80 percent at a DC fast charger in approximately 45 minutes. For daily use, simply connect the van in the evening and it will be ready to drive the following morning.
Consider your electrical connection and load balancing
Because the eDELIVER 3 charges on 1 phase, a 7.4 kW EV charger draws 32 amps from that single phase. If other high-power appliances such as a heat pump or electrical machinery are being used at the same time, an EV charger with dynamic load balancing is advisable. It automatically adjusts the charging power to the available electrical capacity and helps prevent the main fuse from tripping. We always recommend having the connection installed by a certified installer. This is safer and may also be important for your insurance coverage. You will also need a suitable Type 2 charging cable that supports at least 7.4 kW.
Other Maxus models at Wallbox Discounter
Wallbox Discounter also provides EV charger information for other electric Maxus models:
- Maxus EV80 – larger electric van
Frequently asked questions about the Maxus eDELIVER 3
Does the recommended EV charger for the Maxus eDELIVER 3 have a MID meter?
The Easee Charge Up and Besen 7.4 kW do not have an integrated MID meter. If you need certified consumption measurement for a company or lease vehicle, choose an EV charger with an integrated MID-certified energy meter instead. This allows charging consumption to be recorded accurately and reimbursed transparently by an employer. In the Netherlands, a MID meter may also be required for ERE registration. The ERE scheme is only available in the Netherlands.
Can the Maxus eDELIVER 3 charge faster with an 11 or 22 kW EV charger?
No. The eDELIVER 3 charges on 1 phase at a maximum of 7.4 kW. An 11 or 22 kW EV charger will therefore not shorten the charging time, because the vehicle’s onboard charger limits the maximum charging power. A 7.4 kW EV charger is sufficient to use the full charging capacity of the van.
Which charging connector does the Maxus eDELIVER 3 need?
The eDELIVER 3 has a Type 2 connection based on the Mennekes standard. You need at least a 7.4 kW Type 2 charging cable. A lighter 3.7 kW cable cannot transfer the vehicle’s full charging power.